E 320 Wagon (211.265) V6-3.2L (112.949) (2003)
Component Identification
The position display in the instrument cluster (A1) is actuated by the ETC [ETC] control unit (N15/3) via the engine compartment CAN.
The program selection display in the instrument cluster (A1) is actuated by the electronic selector lever module control unit (N15/5) likewise via the
engine compartment CAN.
The program selection performed at the transmission mode switch (S16/5) remains stored only after driving for approx. 1 minute and is then displayed
again after the engine is started again.
The driving time required of approx. 1 minute is due to the system.
The shift pattern display (87) is illuminated when the driving lights are switched on.
GF27.19-P-5129-03QZ Shift Pattern Display, Function
GF27.19-P-5129-03QZ Shift pattern display, function
- TRANSMISSION 722.6
- 209.3 (except 209.376) as of 1.6.03
- 209.4 (except 209.476)
- 211 (except 211.05/076/25/276) as of 1.9.03
- 211 (except 211.05/076/25/276) as of 1.9.03
- except CODE (428a) Steering wheel shift buttons
Component Identification