E 320 Wagon (211.265) V6-3.2L (112.949) (2003)
Check Values For Propeller Shaft Alignment Sleeve
Component Identification
1
Use a suitable drift to drive in the new guide sleeve.
Observe press-in dimension (a) from the end face of the centering sleeve to the joint flange.
Depending on the version of flexible disk (for example, on vehicles with vibration damper) it may lead to a deviation between the measured and the
specified press-in dimension "a". In this case the measured press-in dimension (a) is to be taken into account before removal.
AR41.10-P-0050-05DA Connect Sections of Propeller Shaft Long-Life Grease (NLGI Grade 2)
AR41.10-P-0050-05DA Connect sections of propeller shaft Long-life grease (NLGI grade 2)