E 350 4MATIC Sedan (211.087) V6-3.5L (272.972) (2006)
/v6-3.5l_(272.972)/Page-4181004.png)
6. Install left and right reinforcement (8) on front bumper paneling (1) and fasten with clips (12) (6 each).
Observe precise seat when inserting; do not damage retaining lugs.
Ensure that the front basic carrier (17) arrests properly in the front bumper paneling (1) (see arrow).
Press clips onto assembly lugs with suitable tool. When installing, counterhold front bumper paneling (1), component springs back.
7. Connect reinforcement (8) and front basic carrier (17) with two expansion rivets (9) each.
Component Identification
Vehicles with Parktronic system (PTS) code 220
8.1. Insert PTS wiring harness (21) removed from standard bumper into inner section (17) and fasten to brackets present.
Vehicles with Parktronic system (PTS) code 220
