E 350 4MATIC Sedan (211.087) V6-3.5L (272.972) (2006)
/v6-3.5l_(272.972)/Page-4181005.png)
9.1. Arrest front PTS separation point (X26/27) in bracket of basic carrier (17) (see arrow).
Vehicles with Parktronic system (PTS) code 220
10.1. Connect front bumper PTS sensor unit (A42) and insert into brackets
Before inserting front bumper PTS sensor unit (A42) check decoupling rings; replace if damaged.
11. Insert left and right impact absorber (29) removed from standard bumper into front bumper paneling (1).
On vehicles with Parktronic system (PTS), code 220, ensure that PTS wiring harness is routed correctly. The routing is defined in the impact
absorbers. Do not kink or crush PTS wiring harness.
12. Insert basic carrier (31) into front bumper paneling (1) and fasten with two expansion rivets (9) on left and right.
Observe precise seat, do not damage retaining lugs. The center basic carrier (31) should arrest properly.
Ensure that center basic carrier (31) is seated correctly on the upper attachment points of the front bumper paneling (1) (see arrow).
