E 350 4MATIC Sedan (211.087) V6-3.5L (272.972) (2006)
-
Installation: Pay attention to color coding of fuse holder (11).
16
Unscrew nuts (12)
17
Unscrew nut (13) and remove front prefuse box (F32)
-
Nut, terminal 30 in prefuse box: 7 N.m
18
Install in the reverse order.
AR54.15-P-1340TA Remove/Install Rear Prefuse Box
AR54.15-P-1340TA Remove/Install Rear Prefuse Box
1
Disconnect ground cable of battery
2
Mark installation position of individual supply lines (red) (1)
NOTE: Number of supply lines (red) (1) varies depending on equipment configuration
3
Detach supply lines (red) (1) at the rear prefuse box (F33) and put the supply lines (red) (1) to one side
NOTE
-
Nuts remain attached to supply lines (red)(1).
-
Installation: Observe installation marking.
-
Nut, cable connection to rear prefuse box M6: 7 N.m.
4
Unclip fuse holder (2) at the rear prefuse box (F33)
NOTE
-
Number of fuse holders (2) varies depending on equipment configuration.
-
Installation: Pay attention to color coding of fuse holders (2).
5
Detach positive lead (black) (3) and put to one side
-
Nut, cable connection to rear prefuse box M8: 21 N.m.
6
Disconnect electrical connector (4) at the rear prefuse box (F33)
NOTE
-
Number of electrical connectors (4) according to equipment.
-
Installation: Pay attention to color coding of electrical connectors (4).
7
Unclip rear prefuse box (F33) from latching hook (5) and remove
NOTE: Push latching hook (5) to side.
8
Install in the reverse order.
AR54.21-P-1257T Remove/Install Sam With Fuse and Relay Box, Right Front
AR54.21-P-1257T Remove/Install Sam With Fuse and Relay Box, Right Front