E 350 4MATIC Sedan (211.087) V6-3.5L (272.972) (2006)
Tilt Wheel Motor: Service and Repair
AR46.10-P-0600-06T Remove/Install Height Adjustment Motor Gear Mechanism
AR46.10-P-0600-06T Remove/install height adjustment motor gear mechanism
- with CODE (275) Memory package (driver's seat, steering column, mirrors)
Jacket Tube
Remove
Component Identification
1
Remove bolts (60a) of height adjustment gear mechanism (60) and remove height adjustment gear mechanism (60) from mounting (87).
Install
2
Insert height adjustment gear mechanism (60).
3
Fit bolts (60a) of height adjustment gear mechanism (60) and tighten.
Do not tighten the bolts (60a) until the mounting (87) is installed on the jacket tube.
4
Check alignment of the two bolt holes (arrows). To do this, feed a suitable bolt through both bolt holes and, if necessary, rotate the bolt in order to
adjust the height.