E 350 4MATIC Sedan (211.087) V6-3.5L (272.972) (2006)
Comfort program "C":
^
Starting off always in 2nd gear (except in 1st gear range).
^
The maximum speed is not utilized in any one gear.
When kickdown is operated the upshifts and downshifts take place as in the sport program "S".
GF27.19-P-5137-04NKB Steering Wheel Gear Shifter, Function
GF27.19-P-5137-04NKB Steering wheel gear shifter, function
- TRANSMISSION 722.9
- 171.4
- 230 as of 1.6.06, up to 08
- 209, 211, 219 as of 1.6.06
- with code (428) Steering wheel shift buttons
The status of the steering wheel gear shifter MINUS (S110/1) and steering wheel gear shifter PLUS (S111/1) is read by the steering column module
(N80) via Local Interconnect Network (LIN). The steering column module (N80) places the signal "Upshift" or "Downshift" on the Controller Area
Network bus class C (engine compartment) (CAN-C).
The fully integrated transmission control (VGS) control unit (Y3/8n4) receives the request and initiates the gear change.
Gear changes which could result in impermissibly high or low engine speeds are not performed.
GF27.19-P-5137-04NT Steering Wheel Gear Shifter, Function
GF27.19-P-5137-04NT Steering wheel gear shifter, function
- TRANSMISSION 722.9
- 211, 219 up to 31.5.06
- with code (428) Steering wheel shift buttons
The status of the left steering wheel gear shifter (S110/2) and right steering wheel gear shifter (S111/2) is read by the steering column module (N80)
via Local Interconnect Network (LIN). The steering column module (N80) places the signal "Upshift" or "Downshift" on the Controller Area Network
bus class C (engine compartment) (CAN-C).
The fully integrated transmission control (VGS) control unit (Y3/8n4) receives the request and initiates the gear change.
Gear changes which could result in impermissibly high or low engine speeds are not performed.
GF27.19-P-5137-04PMA Steering Wheel Gear Shifter, Function
GF27.19-P-5137-04PMA Steering wheel gear shifter, function
- TRANSMISSION 722.6
- 209, 211 up to 31.5.06
- with code (428) Steering wheel shift buttons
The status of the left steering wheel gear shifter (S110/2) and right steering wheel gear shifter (S111/2) is read by the steering column module (N80)
via Local Interconnect Network (LIN). The steering column module (N80) places the signal "Upshift" or "Downshift" on the Controller Area Network
bus class C (engine compartment) (CAN-C).
The ETC [EGS] control unit (N15/3) receives the request and initiates the gear change.
Gear changes which could result in impermissibly high or low engine speeds are not performed.
GF27.19-P-5137-04SKC Steering Wheel Gear Shifter, Function
GF27.19-P-5137-04SKC Steering wheel gear shifter, function
- TRANSMISSION 722.6
- 171.4
- 230 as of 1.6.06, up to 08
- 209, 211 as of 1.6.06
- with CODE (428) Steering wheel shift buttons
The status of the steering wheel gear shifter MINUS (S110/1) and steering wheel gear shifter PLUS (S111/1) is read by the steering column module