E 350 4MATIC Sedan (211.087) V6-3.5L (272.972) (2006)
Rear Door Window Motor: Service and Repair
AR72.29-P-1880T Remove/Install Power Window Motor In Rear Door
Shown On Left Rear Door
1
Remove door foil from rear door
NOTE: Only remove door foil until left rear power window motor (M10/5) or right rear power window motor (M10/6) is accessible.
2
Bore out or mill off blind rivet (1) and then remove bracket (2)
CAUTION: Remove rivet residue and chips from door, otherwise there is a risk of rusting.
3
Separate electrical connector (3)
4
Unscrew screws (4).
-
Bolt of motor of electric window lifter of rear door:4.5 N.m
5
Use assembly wedge to push off left rear power window motor (M10/5) or right rear power window motor (M10/6) from inner door panel and then
remove
See "Special Tools" given below.
NOTE: Installation: Use Isoflex Topas L 32 to coat gears on left rear power window motor (M10/5) or right rear power window motor (M10/6)
6
Install in the reverse order
Special Tools
Assembly Wedge, P/N # 110 589 03 59 00