E 350 4MATIC Sedan (212.087) V6-3.5L (272.977) (2010)
Prioritization
All listed vehicle-related services run automatically in the emergency call system control unit. The emergency call system control unit has a priority
management feature to ensure that it does not have to manage several services at the same time. This determines the point at which a service is to be
activated and which service has a higher priority. Depending on which service i to be activated, the emergency call system control unit enables resources
according to the priority list. The requested service is activated or, if at this point in time a higher-priority, vehicle-related service is active, activation is
rejected.
Automatically completing an emergency call has the highest priority.
Priority
Service
1
Automatic alarm call
2
Manual emergency call
3
Vehicle tracking
4
Roadside assistance
5
MB Info
6
Authorization
7
Vehicle remote door unlock or vehicle remote door lock
GF82.95-P-2010FLU MB Information, Function
GF82.95-P-2010FLU MB Information, Function
- with CODE (359) TELE AID emergency call system
Function requirements
^
Circuit 30g On
^
Emergency call system authorized and operating properly
^
The vehicle-related MB Info call service is authorized separately
^
An emergency call system control unit (N123/4) communication module authorized for the vehicle-related MB-Info call service is configured
ex-factory with the telephone number of the corresponding service provider
^
The driver is registered and authorized with the service center
^
One mobile phone network is available in sufficient strength and quality
^
Triggering of an MB Info call through pressing the MB Info button (S93/6s1) for t > 0.5 s
^
A higher-priority vehicle-related service is not active
MB Info general
The MB Info call function enables the driver to call up information on Mercedes-Benz brand products as well as further voice-based services (e.g. hotel
booking).
This vehicle-related service is primarily an oral information service that is provided via the communications module integrated into the emergency call
system control unit.
The MB Info function consists of the following subfunctions:
^
MB-Info call function sequence
^
Function sequence, destination entry by service center or special destinations ("Points of Interest") (with code (512) COMAND APS with DVD