mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AZ88.30-P-0003EW Retrofit Mud Guards|Page 10490 > < AZ88.30-P-0003EW Retrofit Mud Guards|Page 10488
Page 1
background image

Mud Flap: Service and Repair
AZ88.30-P-0003-04EW Retrofit Rear Mud Guards

AZ88.30-P-0003-04EW Retrofit Rear Mud Guards

- except CODE (772) AMG styling package - front spoiler, side skirts, and rear apron
- except CODE (950) AMG sport package

Repair Materials

1. Drill dia. 9 mm hole (arrow) into right rear mud guard (2.1).

Cordless drill/driver

On vehicles with single-pipe exhaust system.

The following steps are shown on the left side of the vehicle on model 212.0. Install on the right side of vehicle as well as on model 212.2 in the
same manner.

2. Clean rear bumper in cross-hatched area with specified cleaning agent.

Rear bumper must be dry, free of dust and grease in cross-hatched area.

3. Unscrew sheet metal screws (3, 4) from fender liner and rear bumper.

On vehicles with single-pipe exhaust system an expansion rivet is installed in addition on the right side of the vehicle in the area below the sheet
metal screw (4); it must also be removed.

AZ88.30-P-0003EW Retrofit Mud Guards|Page 10490 > < AZ88.30-P-0003EW Retrofit Mud Guards|Page 10488