E 350 4MATIC Sedan (212.087) V6-3.5L (272.977) (2010)
12. Place front spoiler (1) on bumper and align to previously attached adhesive tape (4).
13. Remove protective foil starting at center to both sides in increments of 15 to 20 cm and firmly press on front spoiler (1).
When pressing on, press directly on adhesive strips on front spoiler (1) to prevent adhesion problems. The maximum adhesive force is reached
after approx. 72 hours at 20 °C! Avoid any contact with moisture (e.g. rain, fog, carwash) within the first 24 hours. Prevent any mechanical stress.
Do not remove protective foil all at once. To increase processing reliability when installing front spoiler (1), conclude by pressing front spoiler (1)
down on bumper using clean cotton rag, starting at one side.
14. Remove adhesive tape (4).
15. Check position of front spoiler (1) with gauge included in installation kit.
Only on vehicles with code (955) Elegance.