E 350 4MATIC Sedan (212.087) V6-3.5L (272.977) (2010)
/v6-3.5l_(272.977)/Page-2518013.png)
Do not damage paint layer on roof or roof spoiler (1).
3. Remove roof spoiler (1) and clean rear window in bonding area with adhesive tape primer.
The area on the rear window to be glued must be free of dust and grease. Observe manufacturers instructions.
4. Remove protective foils (4) on side adhesive strips from roof spoiler (1).
5. Slightly remove protective foils (5) from adhesive strips on roof spoiler (1) at ends and bend 45° in direction of outer edge.
If necessary, fix bent protective foils (5) in place on outside of roof spoiler (1) with adhesive tape.
6. Place roof spoiler (1) on rear window and align to previously attached adhesive tape (3).
