E 350 4MATIC Sedan (212.087) V6-3.5L (272.977) (2010)
Oil Pan: Procedures
AH01.45-P-0001-01VA Notes on Sealant Path For Oil Pan
AH01.45-P-0001-01VA Notes on sealant path for oil pan
Application of sealant to oil pan bottom section for engine with rear sump
Application of sealant to oil pan bottom section for engine with rear sump
The line (1) identifies the sealant run.
The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead and a height and width of 2.0 mm
(±0.5 mm).
The sealing compound must be applied within 10 min.
The sealant bead must not be spread. Use only the sealant listed in the Repair Products.