E 350 4MATIC Sedan (212.087) V6-3.5L (272.977) (2010)
Drive/Propeller Shaft: Testing and Inspection
AR41.10-P-0085-03T Measure Absolute Angle at Rear Axle Housing
AR41.10-P-0085-03T Measure absolute angle at rear axle housing
- Joint 2-piece
Measurement - Angle 4
The vehicle must be on its wheels for the measurement. All four angles should be measured in succession without interruption.
An angle that has already been measured can be measured a second time if required. To do this, with the Measurement menu displayed, press the
STEP button repeatedly until the display indicates Ready to measure the relevant angle.
Component Identification
1
Clean contact surfaces (arrows) at rear axle housing to remove paint and/or gasket residuals and remove uneven material using a suitable tool.
Shown: model 211 with 187 mm dia. rear axle center assembly
Component Identification
2
Position rear axle center assembly adapter (020h) on rear axle housing (magnetic).
3
Align rear axle center assembly adapter (020h) in horizontal transverse direction using spirit level (020i).
4
Tighten retaining bolts (020k) for rear axle center assembly adapter (020h).
Shown: model 211 with 187 mm dia. rear axle center assembly