E 350 Sedan (212.056) V6-3.5L (272.980) (2010)
23. Route Night View Assist wiring harness (4) and red/black line (rt/sw) along Bowden cable (24) of foot-operated parking brake and fasten in place
using cable ties (25).
24. Open left front cable duct (26).
25. Route white 2-pin connector (9) of wiring harness for power supply (4) into left front cable duct (26).
26. Connect white 2-pin connector (9) of wiring harness for power supply (4) to vehicle floor chassis CAN potential distributor electrical connector
(X30/30).
27. Fasten Night View Assist wiring harness (4) with cable tie (27) to vehicle wiring harness.
28. Make loops out of Night View Assist wiring harness (4) in left front cable duct (26) and fix in place in place.
29. Close left front cable duct (26).