E 350 Sedan (212.056) V6-3.5L (272.980) (2010)
Function sequence for emergency call system status for vehicle remote door unlock
After the vehicle remote door unlock feature has been triggered by a telephone call to the service center, the emergency call system control unit
intermittently actuates the red light-emitting diodes integrated in the emergency call system button via a direct line. Moreover, the emergency call system
control unit displays the message on the instrument cluster via the following route:
-
Diagnostic CAN
-
Front SAM control unit
-
Interior CAN
Component Identification
GF82.95-P-2024FLU Manual or Automatic Emergency Call, Function
GF82.95-P-2024FLU Manual Or Automatic Emergency Call, Function
- with CODE (359) TELE AID emergency call system
Function requirements
^
Emergency call system authorized and operating properly
^
The vehicle-related manual or automatic emergency call, incl. police emergency number "911", is separately authorized
^
An emergency call system control unit (N123/4) communication module authorized for the corresponding vehicle-related service is configured
ex-factory with the telephone number of the corresponding service provider
^
The driver is registered and authorized with the service center
^
One mobile phone network is available in sufficient strength and quality
^
Global positioning system (GPS) reception is available and operating properly
^
Communication between the emergency call system control unit and the supplemental restraint system control unit (N2/10) are operating error-free
^
Production mode deactivated (accomplished following final factory inspection)