E 350 Sedan (212.056) V6-3.5L (272.980) (2010)
/v6-3.5l_(272.980)/Page-2442004.png)
AR77.21-P-0751-01EW Prepare Rear Panoramic Roof Cover For Installation
- with CODE (413) Panoramic glass roof with top sliding roof
Repair Materials
Wear cotton gloves. Fingerprints should not occur anywhere on the inside of the panoramic roof cover (1). To prevent adhesion disturbances when
installing windows, ensure that the entire inside of the panoramic roof cover (1) are free of dust, oil, grease, wax, contamination residues and other
adhesive substances.
1. Check panoramic roof cover (1) for damage.
2. Apply cleaner with part of paper towel to entire inside of panoramic roof cover (1) and wipe with remaining paper towel.
Allow cleaner to dry completely.
3. Uniformly apply primer over full surface in crosshatched area on panoramic roof cover (1).
Observe drying time of at least 10 minutes.
Apply primer to inside of panoramic roof cover (1).
Use same bonding area as on removed panoramic roof cover (1)
AR77.21-P-0751-03EW Apply Bonding Material to Rear Panoramic Roof Cover
AR77.21-P-0751-03EW Apply Bonding Material To Rear Panoramic Roof Cover
- with CODE (413) Panoramic glass roof with top sliding roof
Repair Materials
Wear cotton gloves. Ensure that no fingerprints are present in the bonding surface (1) area. The bonding surface (1) must be free of dust, oil, grease,
wax, contamination residues and other adhesive constituents to prevent adhesion problems when glazing.
