E 350 Sedan (212.056) V6-3.5L (272.980) (2010)
/v6-3.5l_(272.980)/Page-2442005.png)
1. Cut triangular opening of application nozzle so that adhesive can be applied with a height of approx. 13 mm and a width of approx. 8 mm.
2. Guide application nozzle along bonding surface (1) while uniformly pressing out adhesive.
"Pressofix" cartridge gun
Carefully remove adhesive residues immediately. Completely remove excess adhesive from cartridges immediately after applying adhesive and
dispose of it as per local regulations.
The length of the two adhesive beads should be approx. 60 mm.
AR77.21-P-0751-04EW Install Rear Panoramic Roof Cover
AR77.21-P-0751-04EW Install Rear Panoramic Roof Cover
- with CODE (413) Panoramic glass roof with top sliding roof
Install panoramic roof cover (1) within 5 min. after applying adhesive to body, otherwise adhesion force of glue will be impaired.
1. Position panoramic roof cover (1) in rear area (arrows) below folded down seal and lay down on body.
2. Position panoramic roof cover (1) by carefully pushing and sliding below rubber frame (4) on rear glass roof (5).
3. Remove cover material from rear window (6) and rear glass roof (5)
4. Remove adhesive tape from seal (2)
5. Align panoramic roof cover (1) in relation to rear window (6) and flush to rear glass roof (5).
Install reinforcement (3) on multifunction antenna or multifunction antenna mock-up after the adhesive has completely cured.
AR77.21-P-7010-03SX Prepare Front Glass Cover For Installation
AR77.21-P-7010-03SX Prepare Front Glass Cover For Installation
- with CODE (413) Panoramic glass roof with top sliding roof
Repair Materials
