E 350 Sedan (212.056) V6-3.5L (272.980) (2010)
4. Position front mud guard (1) at front fender as shown in picture.
5. Install expansion rivets (6) on fender liner.
6. Screw in self-cutting sheet metal screw (7).
7. Install retaining clamps (5).
Ensure that the retaining clamp (5) is installed so that the barbs (5.1) can reach into the mud guards (1). If this is not observed, the paint on the
fender can be damaged and corrosion can occur.
8. Screw in self-cuting sheet metal screw (7) from below.
9. Remove entire protective foil from adhesive strips on front mud guards (1) and uniformly press adhesive strips against front fender (1)
10. Protect inner front fender edge against corrosion in area of clamps on front mud guards (1) with preservation agent.