Mercedes-Benz E350 Sedan Alignment System Information & Repair
Component Identification
1
Measure distance dimension (H1) from check point (K) to center of Torx(R) bolt head of front mount of rear axle carrier. Measure on the left and
right side in each case.
If necessary, unscrew and screw in Torx(R) bolts and check for deformation.
Shows model 204.0
Component Identification
2
Measure distance dimension (H2) from check point (K) to center of Torx(R) bolt head of rear mount of rear axle carrier. Measure on the left and
right side in each case.
If necessary, unscrew and screw in Torx(R) bolts and check for deformation.