mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Headlamp Switch|Locations|Page 1222 > < Headlamp Switch|Locations|Page 1220
Page 2
background image

The following components of the vehicle's ambient illumination are actuated by the rear SAM control unit:

-

Outer left brake light and taillight (E3e11)

-

Outer left background light (E3e15)

-

Inner left brake light and taillight (E3/1e4)

-

Inner left background light (E3/1e6)

-

Outer right brake light and taillight (E4e11)

-

Outer right background light (E4e15)

-

Inner right brake light and taillight (E4/1e4)

-

Inner right background light (E4/1e6)

-

Left license plate lamp (E19/1)

-

Right license plate lamp (E19/2)

The left front door control unit actuates the left outside mirror ambient lamp (M21/1e1).

The right front door control unit actuates the right outside mirror ambient lamp (M21/2e1).

The trailer recognition control unit actuates the following components via the trailer socket (X58):

-

Taillamps and parking lamps

-

License plate lights

By briefly switching on circuit 15 after switching off the engine, it is possible to discretely leave the vehicle without activating the headlamp
switch-off delay.

The active headlamp switch-off delay is terminated immediately by switching on circuit 15 or by triggering an anti-theft alarm system (ATA [EDW])
alarm (with code (551) Anti-theft alarm system (ATA [EDW])).

Function sequence for AFB

The vehicle's ambient illumination is switched on for a time interval of approx. t = 40 s when the vehicle is unlocked using the release button on the
transmitter key.
The electronic ignition lock control unit transmits the request Unlock vehicle" via the interior CAN to the front SAM control unit. The front SAM
control unit evaluates it and transmits the request Rear lamps On" via interior CAN to the rear SAM control unit and to the trailer recognition control
unit.
The components of the vehicle ambient illumination are actuated as described for the headlamp switch-off delay function.
The locator lighting function is aborted when a door is opened, the transmitter key is inserted into the electronic ignition lock control unit, or when an
anti-theft alarm system alarm has been triggered.

The headlamp switch-off delay and locator lighting functions run in parallel if necessary. An active headlamp switch-off delay (SWA) function is not
terminated by a requested AFB function and vice versa.

Headlamp Switch|Locations|Page 1222 > < Headlamp Switch|Locations|Page 1220