E 350 Sedan (212.056) V6-3.5L (272.980) (2010)
Axle Flange: Service and Repair
AR35.20-P-0130-06SX Pull Rear Axle Shaft Flange Out of Angular Contact Ball Bearing
AR35.20-P-0130-06SX Pull rear axle shaft flange out of angular contact ball bearing
-
- except CODE (Z07) Top protection [model 221 (except 221.179)]
Modification notes
Special Tools
Component Identification
1
Position the pressure plate (01) behind the rear axle shaft flange (1).
2
Screw retaining bolts (03) into the rear axle shaft flange (1).
3
Slide the guide plate (05) forwards until the guide pins (02) are fixed in pressure plate (01).
4
Insert press (04) and pull rear axle shaft flange (1) out of angular contact ball bearing (2) by turning the spindle (arrow).