E 420 (210.072) V8-4.2L (119.985) (1997)
Brake Fluid Pump: Service and Repair
AR42.45-P-0819A Remove/Install ESP Charge Plunger Unit
AR42.45-P-0819A Remove/Install ESP Charge Plunger Unit
- with CODE (472a) Electronic stability program (ESP)
DANGER
^
Risk of poisoning due to consuming brake fluid.
^
Risk of injury due to brake fluid coming into contact with the skin or eyes.
^
Only pour brake fluid into suitable, appropriately marked containers.
^
Wear protective clothing and safety glasses when handling brake fluid.
Removal
1. Ignition OFF.
2. Disconnect hydraulic lines.
-
Seal hydraulic lines and connections with blind plugs.
Installation
Reverse procedure to install, noting the following:
-
Tighten lines to Charging Pump to: 15 Nm
-
Bleed brake system.
-
Read and clear any Diagnostic Trouble Codes (DTC's).