E 420 (210.072) V8-4.2L (119.985) (1997)
Fuse Block: Service and Repair
Remove/Install Fuse Box In Trunk
Removal, installation
1.1 Remove rear seat
-
Sedan
1.2 Fold rear seat forward and remove battery compartment cover
-
T-model
2
Disconnect ground cable from battery
CAUTION: Insulate cable terminal on ground lead for protection against unintentional contact between disconnected ground lead and
ground connection point W10
3
Unclip fuse blocks (A, B and C)
4
Unscrew nuts (1)
5
Remove rear fuse box (F4)
NOTE: For this purpose guide fuse blocks (A and B) downward out of fuse box
6
Disconnect leads on fuse boxes or fuse blocks
Refer to Special Tool below
CAUTION: Disconnect leads only when changing entire fuse box. To avoid mix-ups bind disconnected leads for individual fuse blocks