E 420 (210.072) V8-4.2L (119.985) (1997)
/v8-4.2l_(119.985)/Page-2425001.png)
Control Arm Bushing: Service and Repair
Front Bushing (Front Lower Control Arm)
NOTE: Numbers in parentheses ( ) indicate a component or tool in the associated illustration.
REMOVAL
1. Remove lower wishbone. See: Service and Repair
2. Clamp wishbone in vise, use aluminum or equivalent soft jaws.
3. Loosen outer steel washer of hydraulic mount using,a flat chisel
4. Extract hydraulic mount using extractor/installer tool No. 210 589 00 43 00 thrust piece (012c) and three-arm tool (012h), or equivalents
-
Clean mounting bore
INSTALLATION
1. Insert hydraulic mount (4h) using extractor/installer tool sleeve (012d) and thrust piece (012e), or equivalents
