E 420 (210.072) V8-4.2L (119.985) (1997)
-
Install in reverse order, noting the following information:
-
Check all valves for ease of movement
-
Ensure the utmost cleanliness at all times when working on the shift plate.
-
Fuzzy cloths must not be used.
-
Chamois leathers are particularly suitable.
-
After dismantling, all parts must be washed and blown out with compressed air, ensuring that the parts do not get blown away
-
Insert plain dowel pin (59) in shift housing (arrow)
-
Tighten 6 x 30 mm torx socket bolts, valve housing to shift housing to: 8 Nm
-
Tighten 4 x 12 mm torx socket bolts, side cover to valve and shift housing to: 4 Nm