E 420 (210.072) V8-4.2L (119.985) (1997)
16. Mark vertical line on window.
Draw parallel line (to B-pillar) at a distance of 24 mm.
17. Glue on with adhesive tape and coat intermediate space with black glass primer.
Drying time approx. 30 minutes.
18. Insert seal (1) and fit.
19. Align center bar on seal (1) and fasten to window with MB special adhesive.
20. Fasten rubber blocks (9) in black area at uniform intervals with instant adhesive.
Rubber blocks must be shop made (height 4 mm).
21. Apply "Beta Seal" sealant between seal (1) and rubber blocks (9).