E 500 (124.036) V8-5.0L (119.974) (1994)
Fan Clutch: Service and Repair
Fan Clutch Bearing Bracket
Preparation
-
Viscous fan clutch removed. See: Fan Clutch Assembly
-
Reservoir with coolant drain line removed. See: Coolant Reservoir/Service and Repair
-
Alternator removed.
Removal and Installation
-
Drain coolant at radiator, pour in. See: Service and Repair
-
Detach coolant hoses (4) and (5) at fan clutch carrier (2), fit on.
-
Unbolt air pump (10) with angle bracket (25), place to the side with lines connected, bolt on.
Installation Note: Install air pump (10) with angle bracket (25) to fan clutch carrier (2) free of tension.
-
Unbolt fan clutch carrier (2) to crankcase, bolt on.
Tighten to: 25 Nm.
-
Cooling system, check for leaks. See: Testing and Inspection