E 500 (124.036) V8-5.0L (119.974) (1994)
/v8-5.0l_(119.974)/Page-1707006.png)
7. Press wheel carrier upwards out of spring link (arrows).
Installation note
When installing wheel carrier in spring link ensure that rubber cup seals on supporting joint are not damaged.
8. Pull supporting joint (7a) out of wheel carrier (7) with extractoripulling-in equipment 202 589 00 43 00 consisting of thrust piece (06a), steadying
bush (06b) and clamping bolt (06c).
Note
The cut-out in the steadying bush (06b) must point outward toward the wheel carrier (7).
9. Take off extractor/pulling-in equipment together with supporting joint.
06a
Thrust piece
06b
Steadying bush
06c
Clamping bolt
7
Wheel carrier
