E 500 (124.036) V8-5.0L (119.974) (1994)
5 Unscrew cross bridge (21). Tightening torque 25 Nm.
6 Loosen propeller shaft clamping nut (3) for approx. two turns without sliding back rubber sleeve (sliding along). Tightening torque 30 - 40 Nm,
while paying attention to correct seat of rubber sleeve.
7 Remove front propeller shaft from transmission.
Note: Flexible coupling remains on propeller shaft.
Installation note: Renew self-locking hex. nuts. Tightening torque M 10 = 45 Nm, M 12 = 60 Nm.