E 500 (211.070) V8-5.0L (113.967) (2004)
1
Remove paneling on both C-pillars
NOTE: Do not remove belt end fitting
2
Remove spreading rivets (2)
3
Unscrew nuts (4) and bolts (5)
NOTE: Accessible through the luggage compartment
4
Lift rear shelf paneling (1) and unclip the rear loudspeaker cover (6)
5
Disconnect bass module speaker connector 1 (H14/17x1) and connector 2, bass module speaker (H4/17x2) at the bass module speaker (H4/17)
6
Disconnect electrical connectors (9) at the left rear speaker (H4/7) and right rear speaker (H4/8)
7
Detach retaining clips (10) and remove wiring harness (11) from speaker housing (8)
8
Twist speaker housing (8) counterclockwise until it is unlocked
9
Lift rear shelf paneling (1), together with the speaker housing (8) pull to the front and remove the speaker housing (8) with the speakers
NOTE: Pay attention to the insulating mat under the rear shelf paneling (1) and the electrical connectors (3).
10
Install in the reverse order
AR82.62-P-7836TG Remove/Install Loudspeakers In Rear Shelf