E 500 (211.070) V8-5.0L (113.967) (2004)
Compression Check: Testing and Inspection
AR01.10-P-0010-01T Connect Compression Tester
Connect compression tester
1. Remove cover of left fuse and relay box in the engine compartment.
Installation: Check rubber seal in cover, replace if required.
Cover must be located in the groove at the rear.
2. Disconnect plug (1) at driver-side control unit with fuse and relay module (N10/1).
Shown on model 211.006
3. Plug adapter line (2) into plug position 5 of plug (1).
Shown on model 211.006