mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Mechanical Specifications|Page 6799 > < Mechanical Specifications|Page 6797
Page 1
background image

Water Pump: Service and Repair

Remove, install coolant pump

Bolt assignment of Coolant Pump

DANGER:

-

Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant.

-

Do not open cooling system unless coolant temperature is below 90 degrees C. Open cap slowly and release the pressure. Do not pour
coolant into beverage bottles.

-

Wear protective gloves, protective clothing and eye protection.

1

Drain coolant at radiator

2

Unclip cover at front end of engine

3

Detach bracket (1)

NOTE:  Place to the side with lines connected.

4

Remove coolant temperature sensor (B11/4)

Mechanical Specifications|Page 6799 > < Mechanical Specifications|Page 6797