E 500 (211.070) V8-5.0L (113.967) (2004)
/v8-5.0l_(113.967)/Page-5677002.png)
Rear standing lamp actuation (model 211.2)
The rear SAM control unit with fuse and relay module (N10/2) actuates the following lamps:
^
Left stop lamp, taillamp and parking lamp (E3e9)
^
Right stop lamp, taillamp and parking lamp (E4e9)
The rear door control unit (N111) actuates the following lamps:
^
Left license plate lamp (E19/1)
^
Right license plate lamp (E19/2)
If the "Standing lamp On" signal is still active, then a chime is sounded via the instrument cluster (A1) with the transmitter key (A8/1) removed and the
driver door open.
For vehicles with code (550) Trailer hitch, the signal "standing lamp On" is transmitted by the driver-side SAM control unit with fuse and relay module
(N10/1) to the trailer connection unit [AAG] control unit (N28/1), which applies the signal "standing lamp On" to the trailer hitch socket (13-pin) (X58).
