E 500 (211.070) V8-5.0L (113.967) (2004)
6
Tighten bolts (1, 2, 3, 4) of fore/aft adjustment motor (M20m1)
Component Identification
7
Drive in upper steering shaft (70g) using suitable sleeve (077) until link rod (62) is inserted completely into bracket (70h) of jacket tube (71).
8
Install new self-locking nut (62a) and tighten.
Component Identification
9.1
When installing new fore/aft adjustment motor (M20m1):
Adjust dimension (x) between jacket tube (71) and bracket (70h) at the nut (62b). To do this, make electrical connection if necessary, see step
1.1