E 500 (211.070) V8-5.0L (113.967) (2004)
Tie Rod End: Procedures
AR46.40-P-0400-02CW Push the boot onto the steering gear housing and position
Component Identification
1
Push boot (1) onto steering gear housing (2).
Models 204, 207, 212: Slide on so far until the recesses (1a) appear at the housing (2) of the steering gear.
2
Position boot (1):
Models 204, 207 with diaphragm valve (1b):
As shown in the picture the diaphragm valve (1b) must be located in the center of the marking (2m).
Model 164, 171, 203, 209, 251:
The diaphragm valve (1b) must point in the direction of travel. Model 211, 219:
The diaphragm valve (1b) must point opposite to the direction of travel.
Shown on steering gear model 204