E 500 (211.070) V8-5.0L (113.967) (2004)
Component Identification
The task of the position indicator is to display optically the position of the selector lever, selected gear range (for program selector "C/S") or the
shifted gear (for program selection "M") and the program selection performed at the transmission mode switch (S16/5).
Via the selector scheme symbols (87) the alternative selector lever positions and their sequence are shown symbolically.
GF27.19-P-5129-03QZ Shift Pattern Display, Function
GF27.19-P-5129-03QZ Shift pattern display, function
- TRANSMISSION 722.6
- 209.3 (except 209.376) as of 1.6.03
- 209.4 (except 209.476)
- 211 (except 211.05/076/25/276) as of 1.9.03
- 211 (except 211.05/076/25/276) as of 1.9.03
- except CODE (428a) Steering wheel shift buttons
Component Identification
The position indicator in the instrument cluster (A1) is actuated by the ETC [EGS] control unit (N15/3) via the Controller Area Network bus class C
(engine compartment) (CAN-C).
The program indicator in the instrument cluster (A1) is actuated by the electronic selector lever module control unit (N15/5) likewise via CAN-C.
The program selection performed at the transmission mode switch (S16/5) only remains stored after a driving time of approx. 1 minute and is then
displayed again once the engine is started again. The driving time of approx. 1 minute is necessary because of the system. The selector diagram system
of symbols (87) is illuminated when the driving lamps are switched on
GF27.19-P-5129-03RMZ Shift Pattern Display, Function
GF27.19-P-5129-03RMZ Shift pattern display, function
- TRANSMISSION 722.6
- 209.376 as of 1.6.03
- 209.476
- 211.076 as of 1.9.03
- 211.276
- 219.376
- 230.474 as of 1.9.03
- 230.479
- 209
- 211
- 230
- with CODE (428) steering wheel shift buttons [models 209, 211, 230]