E 500 (211.070) V8-5.0L (113.967) (2004)
Control Module: Description and Operation
GF27.19-P-5104-01N Electric Controller Unit, Design
GF27.19-P-5104-01N Electric controller unit, design
- TRANSMISSION 722.9
Component Identification
Design
The electric controller unit (VGS) (Y3/8) consists of a plastic supporting body in which the following electrical components are combined:
^
Turbine speed sensor (VGS) (Y3/8n1)
^
Internal speed sensor (VGS) (Y3/8n2)
^
Output speed sensor (VGS) (Y3/8n3)
^
Fully integrated transmission control (VGS) control unit (Y3/8n4) with integrated transmission oil temperature sensor (VGS) (Y3/8s2)
^
Selection range sensor (VGS) (Y3/8s1)
^
Working pressure control solenoid valve (VGS) (Y3/8y1)
^
Clutch control solenoid valve K1 (VGS) (Y3/8y2)
^
Clutch control solenoid valve K2 (VGS) (Y3/8y3)
^
Clutch control solenoid valve K3 (VGS) (Y3/8y4)
^
Brake control solenoid valve B1 (VGS) (Y3/8y5)
^
Brake control solenoid valve B2 (VGS) (Y3/8y6)
^
Brake control solenoid valve B3 (VGS) (Y3/8y7)
^
Torque converter lockup clutch control solenoid valve (VGS) (Y3/8y8)
The printed-conductor foil which is inserted in the supporting body makes the connection between the electrical components and a plug socket (11).
The connection to the cable set on the vehicle side is made with a bayonet lock via the plug socket (11).
Apart from the solenoid valves all the other electrical components are permanently connected to the printed-conductor foil.