E 500 4MATIC Wagon (211.283) V8-5.0L (113.969) (2004)
Component Identification
3
Draw the front axle shaft flange (9) into the double-row angular ball bearing (9n) using the extraction and insertion tool.
Ensure that when drawing in the pressure plate (05c) makes proper contact with the double-row angular ball bearing.
AR33.20-P-0315-02I Remove/Install Circlip
AR33.20-P-0315-02I Remove/install circlip
Commercially Available Tools
Component Identification
1
Remove and install circlip using pliers.
Installation: Ensure that the circlip is properly seated in the groove.
AR33.20-P-0315-03I Pulling Double-Row Angular Ball Bearing Out and In
AR33.20-P-0315-03I Pulling double-row angular ball bearing out and in
Special Tools