E 500 4MATIC Wagon (211.283) V8-5.0L (113.969) (2004)
Component Identification
1
Coat the splined profile with Molykote grease before assembly.
2
Reconnect front and rear sections of propeller shaft. The humps on the front propeller shaft must be between the two humps on the linkage arm
(arrows).
Ensure correct seat of rubber sleeve at large diameter.
Position of propeller shaft without clamp connection
Component Identification
Position of propeller shaft with clamp connection
AR41.10-P-0086-02P Prepare Electronic Propeller Shaft Inclinometer
AR41.10-P-0086-02P Prepare electronic propeller shaft inclinometer
Switching on meter
Start Screen
1
Switch on electronic propeller shaft articulation angle meter To do this, press the ON button.
The version and the serial number are displayed for several seconds. Either the selection menu or main menu then appears, depending on which
meter you are using