mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 7253 > < Procedures|Page 7251
Page 7
background image

8. Fit crossmember (1) on the left and right longitudinal member reinforcements and screw on finger tight with two microencapsulated bolts M12 x

1.5 x 35 (13) each.

9. Screw on crossmember finger-tight with two self-locking combination nuts M10 (15) with spring washers each on the right rear center section on

the inside and outside.

Procedures|Page 7253 > < Procedures|Page 7251