mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 22078 > < Procedures|Page 22076
Page 16
background image

4. Route vanity mirror illumination wiring harness (1) without kinks except at predetermined kink points (arrows) and glue to headliner (4) with

adhesive tape (5).
Firmly press on adhesive tape (5), otherwise the adhesive tape (5) can detach itself from the headliner (4).
The routing angle at the intended bending point (arrows) should be 90°.

AR68.30-P-4305-06T Install PTS Warning Display Wiring Harness Into Headliner

AR68.30-P-4305-06T Install PTS Warning Display Wiring Harness Into Headliner

- with CODE (220a) Parktronic System (PTS)

Repair Materials

1. Route PTS warning display wiring harness (1) in recess of new headliner as illustrated.

The PTS warning display (1) has a green marking (arrow). This marking (arrow) must be located at the edge of the cutout (3).

2. Glue PTS warning display wiring harness (19 to new headliner with an approx. 10 cm long strip of adhesive tape at a distance of approx. 5 cm.

Firmly press on adhesive tape, otherwise PTS warning display wiring harness (1) can detach itself from headliner.

Procedures|Page 22078 > < Procedures|Page 22076