mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AN88.50-P-0005T Retrofit Hotel Lock (90 Position)|Page 22275 > < AN88.50-P-0005T Retrofit Hotel Lock (90 Position)|Page 22273
Page 3
background image

Illustrated on Model 203.0

10. Remove contact carrier (7) from clutch housing (9).
11. Install yellow (ge) line for hotel lock wiring harness in chamber "4" of contact carrier (7).
12. Install contact carrier (7) in connector housing (9).
13. Tie back excess length of hotel lock wiring harness and yellow (ge) line to vehicle wiring harness with cable strap.

14. Reconnect black, 28-pin connector (6) in socket "21" in rear SAM control unit with fuse and relay module (N10/2).

Component Identification

AN88.50-P-0005T Retrofit Hotel Lock (90 Position)|Page 22275 > < AN88.50-P-0005T Retrofit Hotel Lock (90 Position)|Page 22273