E 55 AMG Sedan (211.076) V8-5.5L SC (113.990) (2003)
3. Cut a piece of felt strip 95 mm in length. Attach or glue felt strip to the top of the existing felt strips. Ensure there is an overlap of 5 mm (Figure
4).
4. Cut a piece of felt strip 120 mm in length. Attach or glue felt strip to the left of the existing felt strips. Ensure the signal plugs for the valves are
covered (Figure 5).
5. Reinstall dynamic seat control unit and seat back as per WIS document AR91.25-P-1900SX.
Parts Information
NOTE: The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated
on September 26, 2008. Please refer to Netstar -> Star TekInfo -> Star Time for the most current labor time allowance.
In Case of Warranty