E 55 AMG Sedan (211.076) V8-5.5L SC (113.990) (2003)
Headlamp Alignment Control Module: Service and Repair
AR82.10-P-4013T Remove/Install Power Module of Headlamp Range Adjustment (HRA [LWR])
AR82.10-P-4013T Remove/Install Power Module of Headlamp Range Adjustment (HRA [LWR])
- with CODE (614) Bi-xenon headlamp unit
- with CODE (615) Bi-xenon headlamp unit with integrated curve illumination
Illustrated On Left Lamp Unit
DANGER:
-
Danger from Xenon headlamp high voltage
-
Do not touch parts which conduct high voltages. Persons with active electronic implants (e.g.heart pacemakers) should never work on
xenon headlamps.
1
Disconnect ground cable of battery
2
Remove left front headlamp unit (E1)
-
Only when removing the HRA [LWR] power module (E1n3) of the left front headlamp unit (E1) on vehicles with Code (489a) Airmatic
(semi-active air suspension)
3.1 Remove engine compartment paneling at bottom front
3.2 Remove bottom front part of noise encapsulation.
4
Unscrew bolts (1)
5
Carefully press off HRA [LWR] power module (E1n3) from the left front lamp unit (E1), or right lamp unit using longitudinal wedge
See "Special Tools" given below.
NOTE: Installation: Ensure correct seating of gasket (2).
6
Install in the reverse order
Special Tools
Longitudinal Wedge P/N # 115 589 03 59 00