E 55 AMG Sedan (211.076) V8-5.5L SC (113.990) (2003)
2.
Loosen bolt (A, Figure 3) and align high pressure hose over power steering pump such that distance between power steering high pressure
hose pipe and pump pulley is 7 mm or greater.
^
Ensure new sealing rings are installed.
^
Torque bolt to 40 Nm.
3.
Raise vehicle on lift; refer to WIS document AR00.60-P-1000V.
4.
Remove both bottom front engine compartment panels.
5.
Loosen high pressure hose bracket (A, Figure 4) at oil pan and place stop lug against oil pan.
^
Torque to 14 Nm.
6.
Fill power steering pump; refer to WIS document AR46.30-P-0010P.