E 55 AMG Sedan (211.076) V8-5.5L SC (113.990) (2003)
Fuse Block: Service and Repair
AR54.15-P-1340TA Remove/Install Rear Prefuse Box
AR54.15-P-1340TA Remove/Install Rear Prefuse Box
1
Disconnect ground cable of battery
2
Mark installation position of individual supply lines (red) (1)
NOTE: Number of supply lines (red) (1) varies depending on equipment configuration
3
Detach supply lines (red) (1) at the rear prefuse box (F33) and put the supply lines (red) (1) to one side
NOTE
-
Nuts remain attached to supply lines (red)(1).
-
Installation: Observe installation marking.
-
Nut, cable connection to rear prefuse box M6: 7 N.m.
4
Unclip fuse holder (2) at the rear prefuse box (F33)
NOTE
-
Number of fuse holders (2) varies depending on equipment configuration.
-
Installation: Pay attention to color coding of fuse holders (2).
5
Detach positive lead (black) (3) and put to one side
-
Nut, cable connection to rear prefuse box M8: 21 N.m.
6
Disconnect electrical connector (4) at the rear prefuse box (F33)
NOTE
-
Number of electrical connectors (4) according to equipment.
-
Installation: Pay attention to color coding of electrical connectors (4).
7
Unclip rear prefuse box (F33) from latching hook (5) and remove
NOTE: Push latching hook (5) to side.
8
Install in the reverse order.