mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 17512 > < Procedures
Page 2
background image

4. Install inner center section (8) in bumper (1).

Do not yet clip inner center section (8) into retaining lugs (see arrows).

5. Fasten inner center section (8) in bumper (1) with bolts (9) on left and right.
6. Clip left/right inner section (10) into bumper (1) on left and right.

Left/right inner section (10) are various for left and right side.

Vehicles with Parktronic system (PTS) code 220a

7. Install decoupling ring (12) on Parktronic sensors (4).
8. Clip Parktronic sensors (4) into bracket (7).

The electrical connections for the Parktronic sensors (4) must all point to the left.

9. Slide grommets (11) over electrical connectors on Parktroninc sensors (4).

10. Then connect electrical connectors to Parktronic sensors (4) and install grommets (11) above Parktronic sensors (4).
11. Route Parktronic system wiring harness (13) below inner section (8) and clip in inner section (see arrows).

Vehicles without Parktronic system (PTS) code 220a

Procedures|Page 17512 > < Procedures