E 55 AMG Wagon (211.276) V8-5.5L SC (113.990) (2006)
Power Steering Line/Hose: Service and Repair
AR46.25-P-3015TC Remove/Install Hydraulic Line - Downstream of P/S Cooler
Remove/Install Hydraulic Line Of Power Steering
- Downstream of Power Steering Radiator
Shown On Model 211.061
CAUTION: Before opening the hydraulic system the area surrounding the separation point should be cleaned thoroughly. Even the smallest
dirt particles, introduced into the hydraulic components, can lead to malfunctions and a total failure of the hydraulic system
1.1 Remove trim panels of cylinder head cover
1.2 Remove the engine intake air duct upstream of the left air cleaner
2
Suction off oil from the reservoir (8) of the power steering pump
3
Disconnect hydraulic line (7) from reservoir (8) of power steering pump
NOTE: Seal off line connections with plugs.
-
Check condition of hose clamp and hydraulic line (7) and replace if necessary.
4.1 Remove bottom section of sound-proofing capsule
4.2 Remove engine compartment paneling
5
Disconnect hydraulic line (7) from power steering radiator (6)
NOTE: Seal off line connections with plugs.
-
Check condition of hose clamp and hydraulic line (7) and replace if necessary.
6
Remove hydraulic line (7) downwards
7
Install in the reverse order
8
Filling and bleeding power steering pump
9
Check function of power steering and for leaks.