mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 15838 > < AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 15836

E 63 AMG Sedan (211.077) V8-6.3L (156.983) (2007)

Page 1
background image

Parking Assist Distance Sensor: Service and Repair
AZ54.65-P-0001-06T Routeing and Connecting Wiring Harness

AZ54.65-P-0001-06T Routeing And Connecting Wiring Harness

Component Identification

1. Prepare parking assist wiring harness (25) as shown in the diagram and route in the vehicle.

2. Connect parking assist wiring harness (25) to plug position 17 (arrow) in rear SAM/SRB (N10/2) in left side of trunk.
3. Connect parking assist wiring harness (25) to parking assist connector on FFS/rear bumper (X35/28).

4. Route parking assist wiring harness (25) through the left-hand cable duct in the rear wall to the overhead control panel/FFS connector (X25/8) and

connect warning element wiring harness (22).

5. Fasten wiring harnesses with cable straps.

AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 15838 > < AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 15836